87
more on PhotograPhy
At settings other than Auto, the
current selection is shown by an
icon in the picture display.
Cautions
• Auto white balance may not produce the desired results in
scenes without white objects. This can be corrected by adding a
white object to the scene before shooting.
• Options other than
Auto may not produce the desired results
when the ash is used. Select Auto when using the ash.
1
Display white balance options.
Highlight White Balance in shooting menu, and
press Fn2 to display options.
2
Select an option.
Press + or – to select an option.
Press the shutter-release button to take a picture
or press the ADJ. lever or C/D to return to
shooting mode.
Note
Options for White balance can be displayed by pressing the ADJ.
lever (page 134).
To Next Page
Loading...
