First-time user? read this.
20
Basic Setup
A language-selection dialog is displayed the rst time
the camera is turned on. Follow the steps below to
choose a language and set the time and date. To exit
before setup is complete, press the DISP. button. The
language, time, and date can be changed at any time in
the setup menu (page 149).
1
Select a language.
Press +, –, Fn1, or Fn2 to
highlight a language, and
press C/D.
2
Set the clock.
Press Fn1 or Fn2 to highlight
the year, month, day, hour,
minute, or date format, and
then press + or – to change.
After checking that the date
is correct, press C/D.
A conrmation dialog will be
displayed; press C/D
to set the clock.
Notes
• If you leave the battery in the camera body for at least two
hours, the clock and language settings are retained for about a
week after the battery was removed.
• The time and date of recording can be imprinted on
photographs (page 84).
To Next Page
Loading...
