ADJ Lever Setting
Assign up to four frequently-used options to the ADJ.
lever for quick access in 5, P, A, S, and M modes. At
default, the ADJ. lever can be used for white balance
(page 86), ISO setting (page 90), picture quality
(page 61), and image setting (page 71). The following
functions can also be assigned; white balance
compensation (page 89), focus (page 64), metering
(page 70), continuous (page 73), bracketing (page 75),
ash compensation (page 78), manual ash amount
(page 79), and exposure compensation (page 85).
In 4 mode, the ADJ. lever can be used to select
white balance and exposure compensation (exposure
compensation is not available for Movie mode).
To Next Page
Loading...
