161
coPying Pictures to a comPuter
Cautions
• Do not turn the power o or disconnect the USB cable until
copying is complete.
• Files in the destination folder with the same name as the pictures
being copied will be overwritten. If necessary, rename les before
copying begins.
• Do not use a computer to view or edit pictures on a memory
card. Pictures that have been viewed or modied on a
computer can no longer be displayed on the camera body.
Copy pictures to the computer for viewing and editing.
Disconnecting the Camera Body
Before disconnecting the camera
body from the computer, click the
“Safely Remove Hardware” or “Unplug or Eject Hardware”
icon in the taskbar (the illustration above shows the icon
for Windows XP) and select Safely Remove USB Mass
Storage Device or Stop USB Mass Storage Device from
the menu that appears. You can then disconnect the
USB cable.
Notes
• A warning may be displayed if the USB cable is disconnected
without rst removing the camera body from the system as
described above. Be sure to remove the camera body from the
system before disconnecting the cable.
• Conrm that transfer is complete before removing the camera
body from the system and disconnecting the cable.
To Next Page
Loading...
