163
coPying Pictures to a comPuter
3
Copy les from the camera body to the computer.
The camera body will
appear as a volume on
the desktop with pictures
stored in folders as shown
at right. If a memory
card is inserted in the
camera body, the drive
will be named as shown
at right and the contents of the memory card will
be displayed. If no memory card is inserted, the
drive will be named “RICOHDCI” and the contents of
internal memory will be displayed. Copy pictures to
the desired location on your computer.
Disconnecting the Camera Body
Before disconnecting the camera body from the
computer, drag the camera body volume into the Trash
or select the camera body volume and choose Eject
from the File menu. You can then disconnect the USB
cable.
Notes
• A warning may be displayed if the USB cable is disconnected
without rst removing the camera body from the system as
described above. Be sure to remove the camera body from the
system before disconnecting the cable.
• Conrm that transfer is complete before removing the camera
body from the system and disconnecting the cable.
• Connecting the camera body to a Macintosh computer may
result in the creation of “FINDER.DAT” or “.DS_Store” les that will
be listed by the camera body as unmatched les. These les can
be deleted without risk.
To Next Page
Loading...
