First-time user? read this.
24
Tip: Avoiding Blurred Pictures
To prevent blurring caused by the camera movement when the
shutter is released (“camera shake”), press the shutter-release
button smoothly and gently. Blurring is particularly likely to occur
if:
• The ash is o and lighting is poor
• Using digital zoom (page
26)
In situations in which photographs are especially prone to
blurring caused by camera shake, a J icon will be displayed
in the picture display. Hold the camera steady and try focusing
again, or attempt one of the followings:
• Turning the ash on (
) or using auto ash ( ; see page 28)
• Choosing a higher ISO (page
90)
• Using the self-timer (page
31)
• Using the camera shake correction (page
92)
Notes
• If the ash will re when the picture is taken, a pre-ash will be
emitted to assist focus and exposure.
• In the case of overexposure or underexposure, a
icon will
be displayed.
• You can choose how long pictures are displayed in the picture
display after shooting. If desired, photographs can be displayed
until the shutter-release button is pressed halfway (page 142).
To Next Page
Loading...
