Notes
• Bracketing is not available when an option other than
O is
selected for Continuous Mode. White balance bracketing is not
available when shooting monochrome photographs.
• White balance bracketing and color bracketing are not available
when RAW is selected for Picture Quality/Size (page 61).
• The ash turns o automatically when bracketing is in eect.
•
Auto white balance is used in place of Multi-P AUTO when AE-
BKT is selected.
AE-BKT: Exposure Bracketing
To specify variations for exposure value:
1
Select AE-BKT.
Highlight AE-BKT and then press Fn2.
2
Specify the exposure compensation value.
Move the cursor using Fn1
or Fn2, press + or – to specify
the compensation value, and
then press C/D.
3
Return to shooting mode.
Press C/D, or press Fn1 and then press
C/D.
Notes
• If the same exposure compensation value is set, only one image
will be displayed for the same value.
• The step value of the compensation can be set with
Exposure/
Flash Comp. Step in the setup tab (page 140).
To Next Page
Loading...
