Ricoh IM C2010 - E-mail Transmission and Folder Transmission (Fax (Classic) only)

9. Specifications
336
9
Item
Specifications
Encryption
method (for
forwarding)
S/MIME
Internet Fax
send functions:
Automatic conversion of sent documents to e-mail format and e-mail
transmission. Memory transmission only.
Internet Fax
receive
functions
Automatic detection and printing of appended TIFF-F (MH) files and
ASCII text.
Memory reception only.
*1 Full mode
*2 For superfine-character transmission, a fax memory unit is required.
IP-Fax Transmissions and Reception
Item
Specifications
Network
• Standard:
Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
• Option:
IEEE802.11a/b/g/n/ac wireless LAN interface
Wired LAN and wireless LAN cannot be used at the same time.
Scan line
density
• Standard: 8 × 3.85 lines/mm, 200 × 100 dpi (Standard
character), 8 × 7.7 lines/mm, 200 × 200 dpi (Detail character)
• Optional: 8 × 15.4 lines/mm, 16 × 15.4 lines/mm, 400 × 400 dpi
(Super Fine character)
*1
Maximum
original size
Standard: A3 or 11 × 17
Custom (w × h): 297 × 1,200 mm (11.7 × 47.3 inches)
Maximum
scanning size
297 × 1,200 mm (11.7 × 47.3 inches)
Transmission
protocol
Recommendation: T.38, TCP, UDP/IP communication, SIP (RFC
3261 compliant), H.323 v2
Compatible
machines
IP-Fax compatible machines
IP-Fax
transmission
function
Specify an IP address and send faxes to an IP-Fax compatible fax
through a network.
Also capable of sending faxes to a G3 fax connected to a telephone
line via a VoIP gateway.