paper curl back, forming what are called burrs. Before you set originals with burrs,
fan the originals carefully.
• Do not set an original that is wet with correcting fluid or ink. The scanning glass will
be stained and the stain will be scanned with the original.
• When the page keeper is attached, the machine detects originals that double-feed.
However, the following types of originals may not be scanned correctly.
• Folded, damaged, or torn originals
• Perforated originals
• Completely stuck originals
• Originals with perforated lines
• Originals that are partially divided in two
• Originals with sticky notes, paper tape, or other things, on them
Placing Originals in the ARDF
• Do not directly touch the parts illustrated below. Doing so might cause a
malfunction.
To Next Page
Loading...
