https://www.ricoh-return.com/
Energy efficiency
The amount of electricity a machine consumes depends as much on its
specifications as it does on the way you use it. The machine is designed to allow you
to reduce electricity costs by switching to Ready mode after it prints the last page. If
required, it can immediately print again from this mode. If no additional prints are
required and a specified period of time passes, the device switches to an energy
saving mode.
In these modes, the machine consumes less power (watts). If the machine is to print
again, it needs a little longer to return from an energy saving mode than from Ready
mode.
For maximum energy savings, we recommend that the default setting for power
management is used.
Notes to users in the state of California (Notes to Users in USA) (mainly North
America)
Perchlorate Material - special handling may apply. See:
www.dtsc.ca.gov/hazardouswaste/perchlorate
Information for China energy efficiency label (China)
To Next Page
Loading...
