2. Enter the Login User Name and Login Password, and then press [Register].
3. Hold the IC card over the IC card reader again.
• To log out, hold the IC card over the IC card reader or press [Logout] at the top right
on the screen.
• If another user holds the IC card over the IC card reader while you are still logged in,
you are automatically logged out and the new user logs in.
Logging In Using a Mobile Device
Log in to the machine using the RICOH Smart Device Connector app on your mobile
device. You need a mobile device that supports Bluetooth Low Energy (BLE).
1. Enable the Bluetooth function on your mobile device.
2. Start the RICOH Smart Device Connector application on the mobile device, and then
flick left or right to display the login screen.
If the login screen is not displayed, press [Settings] [Navigation Display Item],
and then enable the display of [Login to MFP] on RICOH Smart Device Connector.
To Next Page
Loading...
