• For details about the sizes of originals that you can place in the ADF, see the
following:
page301”Recommended Original Size and Weight”
page303”Sizes Detectable with Auto Paper Select”
• If the originals described below are placed in the ADF, it may cause misfeeds, white
lines, or black lines, or result in damage to the originals. Place these originals on the
exposure glass.
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with adhesive tape, glue or paste stuck to them
• Originals with any kind of coating, such as thermal paper, art paper, aluminum
foil, carbon paper, or conductive paper
• Originals with perforated lines
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
• Thin or highly flexible originals
• Bound originals such as books
• Transparent originals such as transparencies or translucent paper
page69”Placing an Original on the Exposure Glass”
• When loading an original written by pencil on the ADF, the original may be dirty from
by being scraped.
• Correct an original that tends to curl before setting on the machine.
• Fan sheets before loading so that multiple originals do not stick to each other and
are not fed at the same time. If the edge of the paper is not cut well, the edges of the
To Next Page
Loading...
