2. Hold the handle in one hand while supporting the back of the bypass tray with
the other hand, and then open the bypass tray slowly.
Open the bypass tray until it is parallel to the floor.
When loading paper that has a horizontal width of 148–457.2 mm (5.83–18.00
inches), proceed to Step 4.
3. Raise the banner paper guide tray, and then insert it into the bypass tray until it
becomes stable.
4. Load the paper face down until you hear the beep.
5. Align the paper guides to the paper size.
If the guides are not flush against the paper, images might be skewed or paper
misfeeds might occur.
When loading paper that has a horizontal width of 148–899 mm (5.83–35.4
inches), proceed to Step 7.
To Next Page
Loading...
