Specify the vertical and horizontal lengths (Directional Size
Magnification)
Scroll down the [Copy Ratio] screen to press [Directional Mag.(mm)] or
[Directional Mag.(inch)], and then enter the length of the original and copied
image, and then press [OK]. You can separately enlarge or reduce the vertical
length and horizontal length of the image.
4. Press [Start].
• You can change the options of the copy ratio that is displayed on the Copy screen
when pressing [Copy Ratio]. You can also change the enlargement and reduction
ratios that appear when [Copy Ratio] [Others] is pressed on the Copy screen.
See "Reduce / Enlarge", User Guide (HTML).
To Next Page
Loading...
