When the orientations of the original and paper in the paper tray do not match, the
machine rotates the copied image automatically. To reduce an original of A4 (8
1
/
2
×
11) size to A5 (8
1
/
2
× 5
1
/
2
) size, for example, you can select either A5 (8
1
/
2
× 5
1
/
2
)
or A5 (8
1
/
2
× 5
1
/
2
) .
5. Press [Start].
Reducing Slightly to Increase the Margins
The original is reduced to 93% in size and printed in the center of the paper. This setting
is useful if you want to copy an original to a paper of the same size without the edges
being slightly cropped when copied in full size or to increase the margins.
1. Press [Copy] on the Home screen.
2. Place the original.
page107”Basic Procedure for Copying Documents”
3. On the Copy screen, press [Create Margin].
If the key is not displayed, register [Create Margin], by using [Customize Function:
Copy (Standard Mode)] or [Customize Function: Copy (All View Mode)].
See "Customize Function", User Guide (HTML).
4. Press [Start].
• You can change the copy ratio of [Create Margin] to a value other than 93%.
See "Reduce / Enlarge", User Guide (HTML).
Duplex Copying
You can copy two 1-sided pages or one 2-sided page onto the front and back sides of a
single sheet of paper.