Ricoh IM C3010 - Page 224

8. Troubleshooting
222
8
Message
Condition
Solution and reference
An original with a
difficult-to-detect
size, even in the
regular size, such
as a transparency
or paper with sticky
notes or a custom
size original, is
placed on the
machine.
Specify [Scan Size] in [Settings].
"Cannot receive
emails currently."
The machine is
receiving a On-
demand Email
Notification (a
query e-mail from
the administrator),
and manual
reception cannot be
performed.
Wait a while, and press [Manual
Reception: Email].
"Error occurred,
and transmission
was cancelled."
An original had
jammed while
sending a fax.
Press [Confirm], remove the jammed
original, and then send the fax again.
An error occurred
temporarily in the
machine, or there
was interference on
the line such as
excessive noise or
cross-talk.
Press [Confirm] and send the fax again.
"Functional
problem occurred.
Stopped
processing."
The power of the
machine was lost
while receiving an
Internet Fax.
Even if you turn on the power
immediately, you may not be able to
resume reception until the timeout
duration has passed depending on the
settings of the e-mail server. Wait a while.
To receive the fax manually, wait until the
duration has passed and then operate the
machine to perform reception. For the
timeout duration, consult the
administrator.