"EC: The job was
cancelled because
of a failure to store
and skip an error
job."
A document has
been set to be
stored or canceled
when an error
occurs and it did
not operate, so
printing was
canceled by the
auto job cancel
function.
• Fix the error that occurred.
• You can check the settings of the
operation when an error occurs in
[Settings] [Printer Settings]
[System] [Error Action] [Store
and Skip Errored Job].
"ED: The specified
paper size is not
valid for 2 sided
print and therefore
Magazine finishing
is not available. The
job was cancelled."
A paper size that
cannot be used for
2 sided print was
specified and
[Magazine] finishing
was not available,
so printing was
canceled by the
auto job cancel
function.
When specifying [Magazine], check and
specify the paper size that corresponds to
2 sided print.
page308”List of Specifications”
"EE: There are
mixed paper sizes
therefore Magazine
finishing is not
available. The job
was cancelled."
Two or more paper
sizes were used
and [Magazine]
finishing was not
available, so
printing was
cancelled by the
auto job cancel
function.
When specifying [Magazine], use sheets of
the same size.
"P6: Print command
from printer driver
of another
manufacturer has
been received."
The document was
printed using the
printer driver of
another
manufacturer.
Check the type of printer driver being
used.
"P7: RPCS driver for
another model is
being used."
The document was
printed using an
RPCS driver for
another model, and
in a condition that
the machine cannot
print.
Check the type of RPCS driver being used.
To Next Page
Loading...
