6. On the "End User License Agreement" screen, click [Agree and Go to Next].
7. Select the connection between the machine and computer, and then click [Next].
• Network: Search for devices connected to the network.
• USB: Following the instructions on the "Connection with device" screen,
connect the machine and the computer with the USB cable to search for the
machine.
8. Select this machine from among the detected devices, and then click [Next].
The installation of the driver starts.
• If the machine cannot be found at the network connection setup, see the
following section.
page419”If the Machine Cannot Be Found”
• If "The publisher could not be verified" is displayed at the beginning of
installation, continue the installation. There is no problem with the started
installer that is downloaded from the manufacturer's website. Continue the
installation.
To Next Page
Loading...
