2. Press [Menu] ( ), and then press [Recall Program].
3. Press the program number to be changed.
4. Change the scan and output settings.
5. Press [Menu] ( ), and then press [Set Current Settings to Program].
6. Select a program number to register the changed settings.
• To overwrite the program, select the number of the loaded program, and then
press [Program] on the message appears.
• To register the contents as a new program, select a number that is not
programmed.
7. Enter a program name and select an icon.
8. Press [OK].
If you selected [Document Server] in Step 1, proceed to Step 10 after pressing [OK].
9. Press [OK].
Even if you select [Cancel], you can add shortcuts to the program to the Home
screen after changing the settings of the program is complete.
Shortcuts to programs stored in Document Server mode cannot be registered to the
[Home] screen.
10. Press [Exit].
• To change the icon or program name or to delete the program, press [Menu] ( )
and operate from [Edit / Delete Program].
To Next Page
Loading...
