1. Press [Copy] on the Home screen.
2. Place the original.
page107”Basic Procedure for Copying Documents”
3. Press [ ] or [ ] under [Quantity] on the Copy screen to specify the number of copies.
You can enter this using the keyboard after pressing [Quantity] or a number.
4. Press [Sort/Stack] on the Copy screen.
If the key is not displayed, select it from [Finishing].
If the optional equipment that can stack the copied sheets is not attached to the
machine, only [Sort] is displayed on the key.
5. Select the function to specify.
6. Press [Start].
When selecting [Sort] or [Rotate Sort] and placing an original on the exposure glass,
a single set of copies is made. After scanning all of the originals, press [Finish Scn] to
copy the rest of the sets.
• If you specify sort or stack with the finisher or internal shift tray installed, the output
sheets will be shifted by each set.
• You can change the action to perform when paper or memory runs out during sorting
under [Rotate Sort: Auto Paper Continue] or [Memory Full Auto Scan Restart].
To Next Page
Loading...
