When adjusting the density
• Move to the left or right to adjust the density. The colors in the
scanned image darken as you move the slider to the right.
• Press [Density], and then select the [Auto Density] check box to adjust the
density automatically when scanning an original with a non-white
background such as newspaper or a document that has show-through.
• You can specify the shading level in [Scanner Settings] [Scan]
[Color/Density] [Background Density of ADS (Full Color)].
When specifying the resolution
• Select the resolution to use for scanning the original. Image quality
improves as the resolution increases, but the size of the scanned data also
increases.
• To ensure the quality of scanned data, [100 dpi] cannot be selected in the
following cases:
• [High Comp. PDF] is specified in [File Type]
• page192”Specifying the File Type or File Name When Scanning a
Document”
• [PDF] is selected in [File Type] and OCR setting is specified
• See "Scanning an Original as a PDF File with Embedded Text Data",
User Guide (HTML).
4. To send the scanned document to an e-mail address, press [Sender] and then
specify the sender.
When a logged in user is operating the machine, the logged in user becomes the
sender.
page173”Scanning Documents and Sending the Scanned Data by E-mail”
To Next Page
Loading...
