See the animated illustration
displayed on the control panel,
and remove the jammed original.
See "When Paper Is Jammed",
User Guide (HTML).
Toner is almost depleted, or has
run out.
Prepare a replacement toner.
Replace the toner when it runs
out.
page197”Replacing the Toner”
• If appears when there is
a lot of toner, pull out the
print cartridge by following
the toner replacement
procedure that is displayed
on the screen, and then set
it back again.
The waste toner bottle is full, or
almost full.
Prepare a replacement waste
toner bottle.
Replace the bottle when it
becomes full.
page202”Replacing the Waste
Toner Bottle”
Staples are nearly depleted, or
have run out.
Prepare a cartridge for
replacement, and load it when
the staples run out.
page200”Replenishing the
Staples”
The hole punch receptacle is full.
Empty the receptacle.
See "When the Hole Punch
Receptacle Is Full", User Guide
(HTML).
Check that all covers of the
machine and external devices are
closed.
To Next Page
Loading...
