The power of the
machine does not come
on.
The power cable is
unplugged from the wall
outlet.
Connect the ground wire, and
plug the power cable into the
wall outlet.
See "Installation Requirements
After Moving the Machine", User
Guide (HTML).
The machine is
connected to an
extension cord.
You cannot use an extension
cord.
After checking that the screen is
not lit when you touch it and the
main power indicator is unlit,
remove the extension cord and
plug the power cable directly into
the wall outlet.
There may be a problem
with the wall outlet.
After checking that the screen is
not lit when you touch it and the
main power indicator is unlit,
plug the power cord into a
confirmed operating wall outlet.
Only the copy icon is
displayed when the
machine is turned on.
The functions other than
the copy function are
starting up.
The time required for a function
to start up varies depending on
the function. Wait a while.
Only some of the menu
items are displayed
when you press
[Settings] after turning
on the power of the
machine.
The functions other than
the copy function are
starting up.
The time required for a function
to start up varies depending on
the function. More items on the
menu in [Settings] are displayed
as the functions start up. Wait a
while.
The login screen is
displayed.
Basic Authentication,
Windows
Authentication, or LDAP
Authentication is
specified.
Enter the login user name and
password, and then press
[Login]. For the login user name
and password, consult the user
administrator (or custom-
privileges administrator who has
equivalent privilege).
page55”Logging In from the
Control Panel”
To Next Page
Loading...
