The ambient
temperature is
outside the
temperature range
specified for the
machine operation.
Check the room temperature and whether
it satisfies the operational requirements
of the machine. If the machine has just
been moved to the current location, leave
it be for some time and allow it to adapt to
the environment before use.
See "Installation Requirements After
Moving the Machine", User Guide (HTML).
If the message persists after five minutes
even when the room temperature is within
the specifications, wait for 10 seconds or
more after confirming that the main power
indicator is turned off, and then turn on
the power.
page19”Turning On and Off the Power”
A consumable or
supply such as the
toner has been
replenished.
Wait a while and do not turn off the power
of the machine. Turn off the power of the
machine if the message persists after five
minutes, wait for 10 seconds or more
after confirming that the main power
indicator is turned off, and then turn on
the power.
page19”Turning On and Off the Power”
"Shutting down...
Please wait.
Main power will be
turned off
automatically.
Maximum waiting
time: 6 minute(s)"
The power of the
machine was
turned off while the
machine was
starting up or in the
standby mode.
Wait until the power is turned off.
• If the message persists even after you have performed the operations as instructed
in the following message, a malfunction may temporarily occur on the machine. Turn
off the power of the machine, wait for 10 seconds or more after confirming that the
main power indicator is turned off, and then turn on the power.
• "Cover Open"
• "Add Toner" / "Add Staples"
• "Waste Toner Bottle is full." / "Hole Punch Receptacle is full."
To Next Page
Loading...
