The amount of
available internal
storage space on
the destination
computer is
insufficient to
perform Folder
Transfer.
Check that the computer specified as the
transfer destination has enough free
space.
"Check whether
there are any
network problems."
[14-09]
The password
registered in the
address book is
invalid when
performing Folder
Transfer.
Select the forwarding destination in the
address book, press [Edit], and specify a
password in the [Destinations] tab
[Folder] [Folder Authentication Info].
"Check whether
there are any
network problems."
[14-33]
[Fax Email Account]
is not specified.
Register email address, user name, and
password in [Settings] [Fax Settings]
[Detailed Initial Settings] [Fax
Email Account].
"Check whether
there are any
network problems."
[14-51]
The destination to
which to perform
Folder Transfer was
deleted from the
address book.
Register the destination folder to the
address book.
See "Registering the Destination Folder to
Use for Send to Folder", User Guide
(HTML).
"Check whether
there are any
network problems."
[15-11]
The POP3 (IMAP4)
server could not be
found.
Check the settings in [Reception
Protocol], [POP3/IMAP4 Settings] and
[Email Communication Port] on [Settings]
[System Settings] [Send
(Email/Folder)] [Email].
The DNS server
could not be found.
Check the [DNS Configuration] setting on
[Settings] [System Settings]
[Network/Interface].
The machine is not
connected to the
network.
Check that the machine is connected to
the network correctly.