• Check that the IP address
or host name of the main-
machine is specified
correctly in [Settings]
[System Settings]
[Machine] [Others]
[Register/Change/Delete
Remote Machine] on the
sub-machine.
When a message is displayed on the sub-machine
"Authentication with
remote machine failed.
Check remote
machine's
authentication
settings."
Authentication failed
when user
authentication is
enabled on the main-
machine, or the user
does not have
permission to use the
fax function.
Specify the same user
authentication setting as the
main-machine, and register a
user who has the permission to
use the fax function.
See ”Verifying Users to Operate
the Machine (User
Authentication)”, User Guide
(HTML).
"Check whether there
are any network
problems."
[16-00]
The machine is not
connected to the
network.
Check that the machine is
connected to the network
correctly.
"Connection with the
remote machine has
failed. Check the
remote machine
status."
The main-machine is
turned off, or not
functioning normally.
Turn on the power of the main-
machine. If the power is turned
on, check that the device is
functioning normally.
A network error
occurred.
Check that the machine and the
main-machine are connected
to the network correctly.
To Next Page
Loading...
