Ricoh IM C3510 - Page 243

When Messages Appear
241
8
Message
Cause
Solution and reference
The print command
did not complete
correctly.
In the printer driver, go to the [Others] tab
[Special Settings] [Image Quality]
and then change [Vector/Raster:] to
[Raster].
"Communication
error with central
management server
has occurred. The
job has been
cancelled."
The job was
canceled because a
Central
Management
communication
error occurred.
Check the status of the Central
Management machine.
"Compressed Data
Error."
Compressed data is
corrupted.
• Check that the tool used for creating
the compressed data is functioning
properly.
• Check that the machine can
communicate with the computer
properly.
"Data storage
error."
Printing a
document as Test
Print, Locked Print,
Hold Print, Store
Print, or storing the
document in
Document Server
failed. The internal
storage is
malfunctioning.
If the message persists even after you
have turned the power off and then on,
consider repairing the machine.
"Document Server
is not available to
use. Cannot store."
Use of the
Document Server
function is
restricted.
Consult the user administrator (or
custom-privileges administrator who has
equivalent privilege).
"Duplex has been
cancelled."
The paper source
tray is not specified
for duplex printing.
Specify to use the paper tray for duplex
printing in [Settings] [Tray/Paper
Settings] [Paper Size/Paper Type].
"Error has
occurred."
An error such as a
syntactic error has
occurred.
Check that the PDF file to print does not
have an error.