Ricoh IM C3510 - Page 249

When Messages Appear
247
8
Message
Cause
Solution and reference
"There is no paper
tray that matches
the specified paper
size/ paper type.
Change the tray
settings to the
following paper
size/ paper type, or
select another tray
and press [Print]
key."
The paper tray
loaded with paper
of the size or type
specified in the
printer driver is not
available.
• To proceed with printing after
changing the paper setting, select a
tray and press [Print]. When Staple,
Punch, Fold, Cover Sheet, Slip Sheet,
Chaptering, or Designate is specified,
or when Duplex printing is specified
on a paper tray that does not support
the function, printing cannot be
performed. When Sort is specified,
only one copy of the document is
printed.
• To proceed with printing on the
specified paper, load the paper and
then check that the paper size and
type are correctly specified in
[Settings] [Tray/Paper Settings].
page76”Loading Paper into the Paper
Tray”
"Printer font error."
There is a problem
in the font file of the
machine.
Consider repairing the machine.
"Print overrun."
A page image is
discarded while
printing the page.
Decrease [Resolution] in the printer driver.
See "Applying Different Print Settings
Depending on the Document Type", User
Guide (HTML).
"Punch has been
cancelled."
The Punch function
was canceled
because the staple
position is specified
incorrectly.
Check the orientation of the paper and
print data, and the specified punch
position.
See "Punching Holes on Printed Pages",
User Guide (HTML).
"Receiving data
failed."
Transmission of
data was canceled.
Send the data again.
"Sending data
failed."
Transmission of
data from the
printer driver was
canceled.
Check that the computer is operating
normally.