4. To load paper larger than A3 or 11 × 17, pull the tray out completely and then
change the positions of the auxiliary side fence.
Place the tray on a flat surface.
1. Pinch the auxiliary side fence, and then take it out of the tray.
2. Put the auxiliary side fence into the groove for the paper size to use.
5. While pressing the release lever of the end fence, slide the end fence outward.
If the end fence is fixed with the stopper, rotate the fixing screw of the stopper 90
degrees counterclockwise with a coin or similar object and remove the stopper.
To Next Page
Loading...
