Ricoh J014 - Page 14

J012/J013/J014 ii SM
Load Paper in the Paper Feed Unit .................................................... 1-29
Do the Paper Type/Size Settings for Tray 2 ....................................... 1-30
1.4.2 MULTI BYPASS TRAY J507........................................................... 1-30
Installing the Multi Bypass Tray.......................................................... 1-30
Set Paper Type and Size for the Multi Bypass Tray ........................... 1-31
1.4.3 NETWORK INTERFACE BOARD J510 .......................................... 1-31
Install the NIB..................................................................................... 1-31
Connect the NIB ................................................................................. 1-32
Do the Network Settings..................................................................... 1-33
1.5 IMPORTANT INFORMATION.................................................................. 1-35
1.5.1 CHECKLIST BEFORE MOVING THE MACHINE ........................... 1-35
1.5.2 IF THE MACHINE IS NOT USED FREQUENTLY…....................... 1-36
1.5.3 MOVING THE PRINTER................................................................. 1-36
PREVENTIVE MAINTENANCE
2. PREVENTIVE MAINTENANCE ................................................... 2-1
2.1 PM TABLE ................................................................................................. 2-1
2.1.1 SERVICE CALL PROCEDURES ...................................................... 2-1
2.1.2 REGULAR CLEANING ..................................................................... 2-2
REPLACEMENT AND ADJUSTMENT
3. REPLACEMENT AND ADJUSTMENT ........................................ 3-1
3.1 BEFORE REPLACING PARTS.................................................................. 3-1
3.1.1 REMOVAL TABLE ............................................................................ 3-1
3.1.2 IMPORTANT NOTICE ...................................................................... 3-5
3.1.3 PROCEDURE SUMMARY................................................................ 3-6
3.2 COMMON PROCEDURES ...................................................................... 3-10
3.2.1 NETWORK INTERFACE BOARD (NIB) ......................................... 3-10
3.2.2 DUPLEX UNIT ................................................................................ 3-10
3.2.3 INK COLLECTOR UNIT.................................................................. 3-11
3.2.4 PLATEN (J012 ONLY) .................................................................... 3-13
3.2.5 ADF. (J013/J014)............................................................................ 3-14
3.2.6 ORIGINAL PRESSURE PLATE...................................................... 3-15
3.2.7 SCANNER TO FULL UPRIGHT...................................................... 3-16
3.2.8 PAPER CASSETTE, OUTPUT TRAY............................................. 3-17
3.2.9 RIGHT FRONT COVER.................................................................. 3-17
3.2.10 RIGHT COVER ......................................................................... 3-18
3.2.11 RIGHT INNER COVER ............................................................. 3-19
3.2.12 LEFT COVER............................................................................ 3-21
3.2.13 FRONT COVER ........................................................................ 3-21
3.2.14 SCANNER UNIT ....................................................................... 3-23
3.2.15 REAR COVER........................................................................... 3-28
3.3 FLUSHING UNIT...................................................................................... 3-30
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA