SC Error Codes
J012/J013/J014 4-22 SM
4.4.2 OUT-OF-RANGE TEMPERATURE ERRORS
Printer Status at Error Status After Error
Power ON Power to the printer turns on,
and printer enters and
remains in standby mode.
As soon as the temperature of the print
heads reaches the operational
temperature range, the printer enters
the “Ready” mode.
During Printing Printer halts printing and
enters the standby mode.
The printer remains in the “Standby”
mode. The operator must switch the
printer off and on again to restore
normal operation.
Make sure that the room temperature is within the allowed range 10°C to 32°C (50°F to
89.6°F) with RH 15% to 80%. For more details, see Section “1. Installation.”
Let one hour pass for the printer to adjust to room temperature before you use it after
moving to a new location. This is very important after the printer is moved from a cold
location into a warm room.
To Next Page
Loading...
Need help?
General
