Bit Switches
J012/J013/J014 5-96 SM
5.4 BIT SWITCHES
Soft bit switches are used to do some basic function settings that determine how the printer
operates. This section describes the functions of these bit switches.
5.4.1 CHANGING BIT SWITCH SETTINGS
1. [Clear Modes]> [1]> [0]> [7]> [Clear/Stop]
SYSTEM Ver.0.51
Service Menu
2. [Yes]> "Bit Switch"
3. [Yes]
Bit Switch:
BitSW#1Setting
4. [#] or [%] > Select the bit switch (1 to 8).
5. [Yes]
SW#1 00000000
Bit0 _
6. [#] or [%] To move cursor left or right.
7. [Yes] To select the bit to change.
8. [#] or [%] To toggle the setting between "0" and "1.”
9. [Yes] To enter the setting.
10. Repeat Steps 6 to 8 to set other bits.
11. [No] To save the setting and return to previous level.
12. [No]> [No]> [#] or [%] > "End"> [Yes]> To save setting and switch off machine.
13. [Power] to switch the machine on.
To Next Page
Loading...
