To Next Page

To Previous Page

Firmware Update

J012/J013/J014 3-70 SM

or SmartDeviceMonitor

 Do not manually set the computer in system standby or hibernation mode

Before You Begin…

Before you start the update, confirm the following:

 The RPCS raster printer driver is installed on the computer.

 The TWAIN driver is installed on the computer.

 The machine is in standby mode ([Power] key is lit blue].

 No applications are running in the background.

 The printer is connected to the computer with a USB cable.

 The following procedure uses Windows XP screenshots.

Update Procedure

1. Double-click [GelSprinterGX3000SF_Setup.bat] to start the update.

2. Select [English], and then click [OK].

1. Check the displayed details, and then click [Next >].

1. Select the printer name, and then click [Next >].

CÓPIA NÃO CONTROLADA

Ricoh J014 User Manual

Questions and Answers: