Ink Supply
SM 6-53 J012/J013/J014
Detailed
Description
6.6.9 INK COLLECTOR TANK
The ink collector unit holds the used ink sent to it from the maintenance unit above.
Inside the printer, the maintenance unit [1] sits on top of the ink collector tank [2].
The ink from the maintenance unit enters the tank through the slot [3].
The ink collector tank [4] sensor detects when the tank is full and needs to be replaced.
Once the ink collector tank is full, discard it.
Obey the local laws and regulations regarding the disposal of items such as the ink
collector tank.
Never attempt to clean an ink collector tank and use it again.
The printer should be able to use one ink collector tank for about 5 years of normal use.
1 Ink Collector Tank Release
2 Tank Handle
3 Tank Entrance Slot
4 Ink Collector Tank Sensor
To Next Page
Loading...
