Image Correction
J012/J013/J014 4-46 SM
4.5 IMAGE CORRECTION
You can see the image adjustment features on the “Maintenance” menu of the machine
operation panel.
The test prints and adjustments described in this section can also be done with the
printer driver. For more details about doing these test prints and adjustments with
the printer driver, please refer to the User Guide.
4.5.1 PREPARING FOR TEST PRINTING
1. Make sure A4 size or LTR size paper is loaded in the machine.
2. Make sure the machine is ready to print.
4.5.2 NOZZLE CHECK
Main Nozzle Check Pattern
Do this procedure to print the Nozzle Check test pattern. Look at the pattern to determine if
the printer is operating properly or not.
1. [Menu]> "System Settings"
2. [#] or [%] > "Maintenance" > [Yes]> "Nozzle Check?"
3. [Yes]> "*Please Wait* displays as the pattern prints.
4. [#] or [%] > "Nozzle Check" > [Yes]. The Nozzle Check pattern prints.
5. [No] [No]> Standby
6. Check the patterns for missing or broken lines.
Normal Pattern
Abnormal Pattern
To Next Page
Loading...
