SP Mode Service Tables
J012/J013/J014 5-44 SM
5.3 SP MODE SERVICE TABLES
5.3.1 SP TABLE KEY
Notation What It Means
[range/default/step/units] Example: [-127 to +128/4.5/1/0.1 mm].
-127 to +128 Range
4.5 Default
1 Screen increments
0.1 mm
Unit change for every screen
increment.
Here is a summary of common terms and abbreviations used in the SP code descriptions.
Term What It Means
DFU Denotes “Design or Factory Use.” Do not change this value.
DOM "Domestic" market only (Japan)
EXP "Export" markets (North America, Europe, Asia)
NA North America
EUA Europe/Asia
Sub Scan This is printing vertically down the length of an SEF (portrait) page.
Main Scan This is printing horizontally across the width of an SEF (portrait) page.
LEF
Long Edge Feed (paper feeds sideways with the long edge feeding
first)
SEF
Short Edge Feed (paper feeds lengthways with the short edge feeding
first)
To Next Page
Loading...
