Service Mode
J012/J013/J014 5-10 SM
5.2.2 SERVICE MODE MENUS
1. SERVICE'S CHOICE
This group of settings is used to set up the base settings for operation of the machine.
TX SPEED Transmission (Sending) Speed
Sets the transmission speed for fax sending.
Note: For the fax model only.
Default: V.34 -33600
RX SPEED Receiving Speed
Sets the transmission speed for fax receiving.
Note: For the fax model only.
Default: V.34 -33600
TX LEVEL Transmission Level
Transmission signal level.
Note: For the fax model only.
-15 dB to -4 db/-10 dBm /1 dBm
DTMF HIGH FREQ. LEVEL Dial Tone Multi Frequency
DTM high frequency level (transmission level of high DTMF TX)
Note: For the fax model only.
[0 to -15/-7/1 dBm]
To Next Page
Loading...
