Quick Reference
J012/J013/J014 4-62 SM
7. [#] or [%] > Select the size of paper that will be
loaded in Tray 1
8. [Yes]> "Tray Paper Setting?"
Power Off [Power] Power LED flashes then goes out
Power On [Power] Power LED flashes until warm-up finishes, then
lights and remains on.
Print Head Position 1. [Menu]> "System Settings?"
2. [#] or [%] > "Maintenance?" > [Yes]> "1 Nozzle
Check?"
3. [#] or [%] > "4 Head Position?"
4. For more see "Head Position" in "4. Troubleshooting.”
Print Head: Washing
(Before Long Storage)
1. Enter the SP mode
2. Select SP5007 and switch it on.
3. Open the right front door.
4. Remove the print cartridges and replace them with the
cleaning cartridges.
5. Close the right front door.
6. Confirm that "WASHING" and "EXEC" are displayed,
then push [Yes].
7. When you see "OK?" push [Yes].
8. "RUNNING" displays while the cleaning sequence
executes.
For more see "Cleaning the Print Heads Before Long
Term Storage" in "4. Troubleshooting.”
To Next Page
Loading...
