Bit Switches
SM 5-99 J012/J013/J014
Service
Tables
Setting
Bit Function
0 1
Default Details
7
Repair Information OFF ON 0 Displays whether the machine
has been repaired.
0: Machine not repaired
1: Machine repaired
This bit should be set to "1"
after repair so the CE can
determine whether machine
has been previously repaired.
"BitSW#6Setting": Enable Functions for Individual Printer Models
Setting
Bit Function
0 1
Default Details
0 Flushing Mist
Prevention
ON OFF 0 This switch determines
whether the machine waits for
a while before printing in low
temperature (15°C or less).
OFF: No waiting
ON: Waiting until the flushing
mist in low temperature goes
off.
1 Paper Error
Detection
OFF ON 0 This switch sets whether the
paper error detection
executes.
OFF: No detection
ON: Paper error detection
To Next Page
Loading...
