• After you place the originals, press the [B&W Start] key or [Color Start] key within the time
specified in [System Reset Timer]. Otherwise, the job is canceled. For details, see page 251
"Administrator Tools Settings".
• If the memory becomes full while originals are being scanned, the job is canceled.
Duplex Copying Manually Using the Exposure Glass
• When printing odd pages in [Manual 2Sd Scan Mode], the last page cannot be printed. Before
printing the last page, set the [Duplex/Combine] to [Off].
1. Press the [Home] key.
2. Press the [Setting] icon on the [Home] screen.
3. Press [Copier Settings].
4. Press [ ].
5. Press [Duplex/Combine].
6. Press [ ].
7. Press [Manual 2Sd Scan Mode].
8. Press the [Home] key.
9. Press the [Copier] icon on the [Home] screen.
10. Place the original on the exposure glass front side down and with the top to the rear of
the machine.
Place the originals one by one.
11. Press the [B&W Start] key or [Color Start] key.
A message prompting you to place the original back side down on the exposure glass appears on
the display.
Copying 2-Sided Originals with 2-Sided and Combined Printing
115
To Next Page
Loading...
