Problem Solution
The printed paper is curled. • Load the paper upside down in the paper tray.
• If the paper curl is severe, retrieve prints from the output
tray more frequently.
• The paper being used may be damp. Use paper that has
been stored properly.
• Select [Curl Prevented] in [Curl Prevention Mode] under
[System Settings].
• If you enable [Toner Saving] under [System Settings],
printing is generally less dense.
Other Printing Problems
Problem Solution
The toner has run out and printing
has stopped.
When the "Continue printing?" message appears on the
control panel, pressing [Yes] allows you to print a few more
pages, but the print quality of those pages may be lower.
Printer Problems
375
To Next Page
Loading...
