Ricoh M C250FW - Energy Saver Mode Tab

Item Description
Day Enter the current day (1 to 31).
Date Format Select the date format from [MM/DD/YYYY], [DD/MM/YYYY], or
[YYYY/MM/DD].
Set Time
Item Description
Time Format Select 24- or 12-hour time format.
Time (AM/PM) Select [AM] or [PM] if 12-hour time format is selected.
hour (0-23) Enter the current hour if 24-hour time format is selected (0-23).
hour (1-12) Enter the current hour if 12-hour time format is selected (1-12).
min. (0-59) Enter the current minute (0-59).
Energy Saver Mode Tab
Energy Saver Mode
Item Description
Energy Saver Mode 1 Select [Active] to set the machine to enter Energy Saver mode 1 if the
machine has been idle for about 30 seconds.
It takes less time to recover from Energy Saver mode 1 than from power-off
state or Energy Saver mode 2, but power consumption is higher in Energy
Saver mode 1 than in Energy Saver mode 2.
Energy Saver Mode 2 Set the machine to enter Energy Saver mode 2 after the period of time
specified for [Waiting Time (1 min. - 60 min.)] is passed (1 to 60 minutes).
The machine consumes less power in Energy Saver mode 2 than in Energy
Saver mode 1, but it takes longer to recover from Energy Saver mode 2
than from Energy Saver mode 1.
• The machine recovers from Energy Saver mode when it receives a print job, prints a received fax,
or when the [Copy], [Color Start], or [B&W Start] key is pressed.
• Regardless of the settings for Energy Saver mode 1 or Energy Saver mode 2, the machine enters
Energy Saver mode 1 after being idle for 10 minutes.
8. Configuring the Machine Using Utilities
312