Ricoh M C250FW - Configuring the System Settings; Sound Volume Adjustment Tab; Tray Paper Settings Tab

Configuring the System Settings
Click [System Settings] to display the page for configuring the system settings.
This page contains the following tabs: [Sound Volume Adjustment], [Tray Paper Settings], [Copier],
[Fax], [Priority Tray], [Toner Saving], [I/O Timeout], and [B&W Print Priority].
Sound Volume Adjustment Tab
Sound Volume Adjustment
Item Description
Panel Key Sound Select the volume of the beep that sounds when a key is pressed from [Off],
[Low], [Middle], or [High].
Ring Volume Select the volume of the ring when a call is received from [Off], [Low],
[Middle], or [High].
On Hook Mode Select the volume of the sound from the speaker during on hook mode from
[Off], [Low], [Middle], or [High].
Job End Tone Select the volume of the beep that sounds when a job is complete from
[Off], [Low], [Middle], or [High].
Job Error Tone Select the volume of the beep that sounds when a fax transmission error
occurs from [Off], [Low], [Middle], or [High].
Alarm Volume Select the volume of the alarm that sounds when an operation error occurs
from [Off], [Low], [Middle], or [High].
Tray Paper Settings Tab
Tray 1
Item Description
Paper Size Select the paper size for Tray 1 from the following:
A4, A5, A5 (210 × 148 mm), A6, B5 JIS, B6 JIS, 8
1
/
2
× 14, 8
1
/
2
× 13,
8
1
/
2
× 11, 8
1
/
4
× 13, 8 × 13, 5
1
/
2
× 8
1
/
2
, 7
1
/
4
× 10
1
/
2
, 8
1
/
2
×
13
2
/
5
, 8
1
/
2
× 13
3
/
5
, 4
1
/
8
× 9
1
/
2
, 3
7
/
8
× 7
1
/
2
, C5 Env, C6 Env, DL
Env, 16K, Custom Size
8. Configuring the Machine Using Utilities
276