Testing Transmission
• When a USB flash memory device is inserted into the machine, scanned documents will be stored
in the USB flash memory device. Confirm that there are no USB flash memory devices inserted into
the machine.
1. Place the original on the exposure glass or in the ADF.
2. Press the [Home] key.
3. Press the [Scanner] icon on the Home screen.
4. Press [Address Book].
5. Select the desired destination, and then press [OK].
When you select a destination, a check mark appears against the selected destination.
When you specify a scan destination, the machine's scan settings change automatically according
to the information registered for that destination in the Address Book. If necessary, you can change
the scan settings using the control panel. For scan settings, see page 167 "Specifying Scan
Settings for Scanning".
6. Press the [B&W Start] key or [Color Start] key.
To scan in black and white, press the [B&W Start] key.
Registering Scan Destinations
133
To Next Page
Loading...
