Ricoh M C250FW - Fax Setting Workflows

Fax Setting Workflows
This section explains the preparations and procedures to send fax documents to a folder on a client
computer.
After following the procedures below, you can send fax documents from the machine to a shared folder
on a client computer.
Connect the machine to a telephone line.
Set the date and time.
Specify the telephone line type.
Select either an external line or extension line.
Specify the number of the external line.
*1
Specify the reception mode.
*1
Specify when using an extension line or a PBX.
Procedure Reference
See Setup Guide.
For details about selecting reception modes, see page 202 "Selecting
Reception Mode".
6. Sending and Receiving a Fax
172