• Register the scan destination in the Address Book using Web Image Monitor. For details, see
page 126 "Registering Scan Destinations".
• When a USB flash memory device is inserted into the machine, scanned documents will be stored
in the USB flash memory device. Confirm that there are no USB flash memory devices inserted into
the machine.
1. Place the original on the exposure glass or in the ADF.
To place the original, see page 76 "Placing Originals".
2. Press the [Home] key.
3. Press the [Scanner] icon on the [Home] screen.
4. Press the [FTP] tab.
5. Press [Address Book].
6. Select the desired destination, and then press [OK].
When you select a destination, a check mark appears against the selected destination.
7. Press the [B&W Start] key or [Color Start] key.
To scan in black and white, press the [B&W Start] key.
To scan in color, press the [Color Start] key.
Depending on the machine's settings, you may see the following screen on the display when
scanning from the exposure glass.
Basic Operation of Scan to FTP
149
To Next Page
Loading...
