4. Press the [Speed Dial] tab.
5. Select the desired Speed Dial entry, and then press [OK].
When you select a Speed Dial, a check mark appears against the selected Speed Dial.
For registering the Speed Dial entries, see page 176 "Registering Fax Destinations".
• You can check the registered names and fax numbers by printing a report. For printing the Speed
Dial list, see page 259 "Printing Lists/Reports".
Specifying the destination using the broadcast function
You can send a fax to multiple destinations (up to 100 destinations) simultaneously.
Faxes are sent to destinations in the order they were specified.
1. Press the [Home] key.
2. Press the [Fax] icon on the [Home] screen.
3. Add a destination by using one of the following methods:
• To add a Quick Dial destination: press [Address Book], press the [Quick Dial List] tab, select a
destination, and then press [OK].
• To add a Speed Dial destination: press [Address Book], press the [Speed Dial List] tab, select
a destination, and then press [OK].
• To add a manually-specified destination: press [Manual Entry], press the box, enter the
destination fax number, and then press [OK] twice.
• While specifying multiple destinations, you can press the [Clear/Stop] key to clear all destinations.
• If you specify multiple destinations in Immediate Transmission mode, the mode switches to Memory
Transmission mode temporarily.
• While broadcasting, pressing [Clear] cancels the fax to the current destination only.
6. Sending and Receiving a Fax
190
To Next Page
Loading...
