• The number of forwarding attempts and the attempt interval time can be specified using Web
Image Monitor. For details about the forwarding destination, forwarding trials and interval settings,
see page 276 "Configuring the System Settings".
Forwarding settings
To specify the forwarding conditions for received faxes, configure the machine as follows:
1. Press the [Home] key.
2. Press the [Setting] icon on the [Home] screen.
3. Press [Fax Settings].
4. Press [Reception Settings].
5. Press [ ].
6. Press [Reception File Sett.].
7. Select [Forward].
To send e-mail notifications after faxes are forwarded, proceed to Step 8.
8. Press [ ].
9. Press [Notify Forwarding].
10. Press [Active].
• [Active]: Send an e-mail notification after forwarding. E-mail notification destination depends
on how the forwarding destination is configured.
• [Inactive]: An e-mail notification is not sent.
11. Press the [Home] key.
Specifying the forwarding destination using Web Image Monitor
1. Start the web browser and access the machine by entering its IP address.
2. Click [System Settings].
Receiving a Fax
209
To Next Page
Loading...
