Ricoh M C250FW - Page 265

IPV4 Configuration
Item Description Value
IPV4 DHCP Sets the machine to receive its IPv4
address, subnet mask, and default
gateway address automatically from a
DHCP server.
• Inactive
• Active
Default: [Active]
• IP Address
Specifies the machine's IPv4
address when DHCP is not used.
Use this menu to check the
current IP address when DHCP
is used.
Default: 11.22.33.44
• Subnet Mask
Specifies the machine's subnet
mask when DHCP is not used.
Use this menu to check the
current subnet mask when DHCP
is used.
Default: 255.255.255.0
• Gateway Address
Specifies the machine's default
gateway address when DHCP is
not used.
Use this menu to check the
current default gateway address
when DHCP is used.
Default: 11.22.33.44
IP Address
Method
Displays the IP address acquisition
method.
• IP not Ready
• DHCP
• Manual Configuration
• Default IP
Wi-Fi Direct IP
Addr
Displays the IP address of Wi-Fi Direct. –
Network Settings
263