Message Cause Solution
"Exceeded max. number of
alphanumeric characters for
the path."
The maximum number of
specifiable alphanumeric
characters in a path has
been exceeded.
Check the maximum number of
characters which can be entered, and
then enter it again. For details about
the maximum enterable number of
characters, see "Values of Various Set
Items for Transmission/Storage
Function", Scan.
"Exceeded max. number of
alphanumeric characters."
The maximum enterable
number of alphanumeric
characters has been
exceeded.
Check the maximum number of
characters which can be entered, and
then enter it again. For details about
the maximum enterable number of
characters, see "Values of Various Set
Items for Transmission/Storage
Function", Scan.
"Programmed. Cannot
program the destination(s)
that is not programmed in
the address book."
The destinations that were
selected while registered to
the program contain a folder
destination for which one of
the following destinations is
set:
manually entered
destination, WSD
destination, or DSM
destination
WSD destinations and DSM
destinations cannot be registered to the
program because they cannot be
registered in the address book. For
manually entered destinations, register
the destinations in the address book,
and then try to register them to the
program again.
"Please check Scanner
Features."
"The program is recalled.
Cannot recall the
destination(s) for which
access privileges are
required."
The currently logged-in user
does not have permission to
view the destination that was
registered in the program.
For details about how to set
permissions, see "Limiting Available
Functions", Security Guide.
"The program is recalled.
Cannot recall the
destination(s) that is deleted
from the address book."
The destination stored in the
program could not be
recalled because it was
deleted from the address
book.
Enter the destination directly to send
data separately.
Messages Displayed When You Use the Scanner Function
191
To Next Page
Loading...
